Home > prodcts > Solution

PYNQ-Z2

Product model :

2019-01-10 Times of browsing： 4425

Product introduction
characteristic
Product specification
Physical picture
Resources

PYNQ is an open-source project from Xilinx that makes it easy to design embedded systems with Zynq Systems on Chips (SoCs). Using the Python language and libraries, designers can exploit the benefits of programmable logic and microprocessors in Zynq to build more capable and exciting embedded systems.

Dual ARM® Cortex™-A9 MPCore™ with CoreSight™
32 KB Instruction, 32 KB Data per processor L1 Cache
512 KB unified L2 Cache
256 KB On-Chip Memory
2x UART, 2x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO
2x USB 2.0 (OTG), 2x Tri-mode Gigabit Ethernet, 2x SD/SDIO on-chip peripherals
85K logic cells (13300 logic slices, each with four 6-input LUTs and 8 flip-flops)
630 KB of fast block RAM
Four clock management tiles, each with phase-locked loop (PLL)
220 DSP slices
Internal clock speeds exceeding 450MHz
2x 12 bit, 1 MSPS On-chip analog-to-digital converter (XADC)

Feature	Description
FPGA	Zynq-7000 SoC XC7Z020-1CLG400C
I/O Interfaces	USB-JTAG Programming circuitry USB OTG 2.0 USB-UART bridge One 10/100/1G Ethernet HDMI Input HDMI Output I2S interface with 24bit DAC with 3.5mm TRRS jack Line-in with 3.5mm jack
Memory	512 Mbyte DDR3 with 16-bit bus @ 1050 Mbps 128 Mbit Quad-SPI Flash Micro SD card connector
Switches and LEDs	2 Slide switches 2 RGB LEDs 4 LEDs 4 Push-buttons
Clocks	One 125 MHz for PL One 50 MHz for PS
Expansion ports	2 Pmod ports 16 Total FPGA I/O (8 shared pins with Raspberry Pi connector) 1 Arduino Shield connector 24 Total FPGA I/O 6 Single-ended 0-3.3V Analog inputs to XADC Raspberry Pi connector 28 Total FPGA I/O (8 shared pins with Pmod A port)